Loading Of The Battery; External Power Supply; Turning The Appliance On And Off - Alcad 918 Serie Manuel D'utilisation

4.2

Loading of the battery

To load the battery inside the appliance:
•
Connect the external power supply provided through the jack plug of the appliance (on the right
side)
•
Connect the power supply on the mains
•
The internal charger starts loading the battery; the green lamp lights up.
Loading will be faster if the appliance is off but will work if the appliance is on. Once the
battery loaded, the lamp will shut off automatically.
Discharge the appliance only with the provided power supply block.
The battery is 80%-loaded after 1 hour 30 minutes. The total charge is reached after 2 hours 10
minutes.
4.3

External power supply

The appliance works under 15V (4.6 A) power supply. The power supply block provided is an external
power supply too. Only use the power supply block provided with the appliance.
4.4

Turning the appliance on and off

Press the button on the right side of the appliance:
The entry page appears on screen.
The message "Autotest: running" is shortly displayed, then disappears.
Pressing this button turns the appliance off.
The ON/OFF button lights up when the appliance is working.
Pressing the ON/OFF button for a long time forces the shut-off of the appliance; proceed
this way only in case of necessity.
20