Checking The Aligned Satellite; Double Check Sat - Alcad 918 Serie Manuel D'utilisation

9.3

Checking the aligned satellite

To check if you have aimed the right satellite, press the NIT key.
The appliance searches the MPEG NIT table on one of the 4 transponders and displays the name of the
satellite:
Attention: The displayed name depends on the content of the MPEG NIT table.
Some distributors provide no (or poor) such table.
The displayed information may be wrong.
9.4

Double Check Sat

This mode allows you to orientate a double LNB by checking 4 transponders on 2 selected satellites. This
mode is identical to the simple Check Sat mode
To access the double Check Sat mode, you have to trigger the Double key.
Sat. A
Sat. B
43
.
To return to the
simple mode