Power-Up; Battery - Alcad 918 Serie Manuel D'utilisation

Mesureur de champ
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4 Power-up

All the material is checked before shipment and delivered in an adapted packaging. There is no
particular unpacking instruction.
The appliance is equipped with a Lithium-Ion (Li-ion) battery. It is shipped with the battery loaded.
However, if the appliance has remained idle more than one month long, check its charge state and
reload if required.
4.1

Battery

Attention: Any intervention on the battery requires the disassembly of the appliance and should
be made by a ALCAD technician.
Use only batteries provided by ALCAD.
Security advice:
Do not throw into the fire or heat up the battery pack
Do not shunt the parts of the battery: risk of explosion!
Do not drill
Do not disassemble the battery pack
Do not reverse the polarities of the battery
This battery pack includes a protective item that should not be damaged or removed
Protect the pack from the heat while storing
Do not damage the protective sheath of the pack
Do not store the appliance in a vehicle under sunlight
Used batteries are not for domestic waste; lithium batteries should be recycled.
The battery has a 200-charge-discharge cycle life or 2 years.
Advice to extend the life of your battery:
Avoid deep discharges
Do not store the batteries too long without using them
Store the battery around 40% loading
Do not fully charge or fully discharge the battery before storage.
When the battery is almost fully discharged, the appliance will warn "Low battery", then will shut
off after a few minutes.
19

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fsm-6409180008

Table des Matières