Measurement Map - Alcad 918 Serie Manuel D'utilisation

17 Measurement map

To access the MEASUREMENT MAP function, press Home then Measurement map:
It is an automatic level and error rate measurement of the setups in the measurement list with labeling of
the levels beyond tolerance.
Measurement result
for channel 38
under DVB-T/H
You can save these measures on an USB stick
Pressing the key
The name of the file comes from the launching time of the recording
The save starts after browsing of all setups
This is when the date and time are recorded
The « mode » key allows you to select the duration between two measurements in the
list
You can choose: mono (only one measurement made), 0mn (the measurement starts
again as soon as it is finished), 1mn (the measurement starts every minute), 10mn (the
measurement starts every 10 minutes) ,1h (the measurement starts every hour), 8h (the
measurement starts every 8 hours), 24h (the measurement starts every 24 hours)
75
••• opens a CSV file