9
Locomotive functions
9.1
Switching locomotive functions with function
keys
Ex-factory, the function keys are assigned as follows:
You can freely assign the digital functions F0 to F28 to
these function keys. See section Assigning locomotive
functions to function keys (
to proceed.
Action
Function keys B and C behave accordingly.
switches digital function F0
switches digital function F1
switches digital function F2
Display
Changes the function status assigned to key
'A' for the active locomotive address (factory
setting: F0).
Here: The function is being enabled, as
indicated by the dash on the right.
The function is being disabled.
p. 21) for information on how
Explanation
19