Features And Specifications - EUROM THG12000 Livret D'instructions

FEATURES and SPECIFICATIONS

 Portable patio/garden heater with gas bottle container
 Only suitable for outdoor use
 Heat issued via reflective cap
 Connection to gas supply equipped with swivel nuts
 Gas bottle container, stand, operation panel, burner and flame screen made of powder-coated plate
steel.
 Aluminium reflector cap
Specifications:
Max. capacity
Min. capacity
Fuel
Fuel consumption
Connection pressure
Opening burner nozzle
Opening pilot light nozzle
Height incl. stand
Diameter reflector cap
ASSEMBLY
Make sure you have access to the following tools before starting to assemble the device:
 Open-ended spanners 10 and 13
 Adjustable monkey wrench 8 inch
 Water pump pliers
 Medium screwdriver
 Teflon tape
 Plant sprayer with soapy liquid for leak test
Check that all of the components are present using the assembly
description.
Step 1
1-3 Place the three bent tubes (that together form the container frame)
on the base, see diagram.
1-4 Use 3 M8 x 16mm bolts to mount the tubes on the base.
12000 Watt
5000 Watt
Propane or butane
450 to 870 gram per hour
30 mBar or 50 mBar (depending on version)
1.90 mm
0.18 mm
2210 mm
810 mm
A = container frame B = base C = bolt
Step 2
2-3 Place the stand with the attachment plate on top of the container frame.
2-4 Use 6 M6 x 35mm bolts with nuts to mount the stand on the frame.
D = stand E = nut F = bolt
- 19 -