Ceiling Fan Assembly - Emerson LINDELL CF825AP00 Mode D'emploi

3.1
Remove the Five Rubber Shipping Spacers and
Screws to free the Motor Hub for installation of the
Ceiling Fan Blade Assemblies, as follows:
Push in, on the Rubber Shipping Spacer to relieve the
pressure from the Motor Housing (Figure 1).
Rotate the Motor Hub to align the Switch Plate Hole over
the Shipping Spacer Screw (Figure 1).
Remove and Discard the Five Shipping Spacer Screws
and Rubber Shipping Spacers (Figure 1).
3.2
Choose the Blade Decorative Color you prefer and
prepare to mount the Blade Flange, as follows:
Mount the Fan Blade to the Blade Flange using the three
#10-24 x 7 mm Washer Head Screws (supplied).
Securely tighten each screw (Figure 2).
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not insert
foreign objects in between rotating fan blades.

3. Ceiling Fan Assembly

5
SWITCH PLATE HOLE
PUSH IN
ON RUBBER
SPACER
Figure 1
BLADE FLANGE
Figure 2
Please contact 1-800-654-3545 for further assistance
REMOVE &
DISCARD
RUBBER SHIPPING
MOTOR
SPACERS &
HUB
SCREWS (5)
#10-24 x 7 mm
WASHER HEAD
SCREW (3per blade)
FAN BLADE
emersonfans.com
U.L. Model No.: CF825