Emerson LINDELL CF825AP00 Mode D'emploi page 16

NOTE: If the Ceiling Fan is to be Installed Without
the Light Kit Fitter Assembly, Skip Section 6: Final
Assembly and Proceed to Section 8: Switch Cup
Housing Assembly Only.
6.3
Remove the Center Screw Plug from the Switch Cup
Housing (Figure 22).
Store the Screw Plug in a safe place if needed for future
use.
6.4
Remove and retain the Lockwasher and Nut from the
Light Kit Fitter Assembly (Figure 23).
Insert the Black and White Wires from the Light Kit Fitter
Assembly through the Center Hole of the Switch Cup
Housing (Figure 23).
6.5
Thread the Switch Cup Housing onto the Light Kit Fitter
Assembly until securely tightened (Figure 24).
Reinstall the Lockwasher and Nut onto the Light Kit Fitter
Assembly Threaded Screw and tighten securely
(Figure 24).
6. Final Assembly
(Continued)
Figure 22
Figure 23
Figure 24
16
CENTER SCREW PLUG
SWITCH CUP
HOUSING
SWITCH CUP
HOUSING
REMOVE &
RETAIN
LIGHT KIT FITTER
ASSEMBLY
NUT
LOCKWASHER
THREADED
SCREW
SWITCH CUP
HOUSING
LIGHT KIT
FITTER
ASSEMBLY
U.L. Model No.: CF825