Emerson LINDELL CF825AP00 Mode D'emploi page 19

6.10
Align the Light Kit Fitter Assembly Holes with the Switch
Cup Plate Holes.
Carefully tuck all the Wires and Connectors into the Switch
Cup Housing.
Secure the Light Kit Fitter Assembly by reinstalling the
Three Switch Cup Plate Screws, previously removed
(Figure 29).
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the light kit fitter assembly and the switch cup
plate.
A spare #8-32 x 8 mm Flat Head Screw is in the hardware
bag, if needed.
6.11
Install the two 6.5-Watt Medium Base LED Bulbs
(A15 - E26) (supplied) into the Light Kit Fitter Assembly
Sockets (Figure 30).
6. Final Assembly
(Continued)
SWITCH CUP PLATE
Figure 29
LIGHT KIT FITTER
ASSEMBLY SOCKETS
(2)
Figure 30
19
SCREWS (3)
SWITCH CUP
HOUSING / LIGHT
KIT FITTER
ASSEMBLY
6.5-WATT MEDIUM
BASE LED BULBS
(2)
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF825