Switch Cup Housing Assembly Only - Emerson LINDELL CF825AP00 Mode D'emploi

8. Switch Cup Housing Assembly Only

8.1
The two Connectors are Keyed and Color-Coded and
must be mated correctly (color-to-color) before they
can be engaged, as follows:
Engage the Fan Motor / Housing Assembly Color-Coded
Connector to the Switch Cup Housing Color-Coded
Connector (Figure 37).
Make sure the Connector Latches closes properly.
8.2
Remove the Three Switch Cup Plate Screws from the
Switch Cup Plate (Figure 38).
Retain the Screws for future use.
FAN MOTOR / HOUSING ASSEMBLY
COLOR-CODED CONNECTOR
SWITCH CUP HOUSING
COLOR-CODED CONNECTOR
Figure 37
REMOVE &
RETAIN
SWITCH CUP
PLATE SCREWS (3)
Figure 38
23
(No Light Kit Usage)
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF825