How To Wire Your Ceiling Fan - Emerson LINDELL CF825AP00 Mode D'emploi

If you feel that you do not have enough electrical
wiring knowledge or experience, have your fan
installed by a licensed electrician.
WARNING
!
To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.
NOTE: If you are not sure if the outlet box is grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
WARNING
!
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse box before wiring. All wiring must be in
accordance with National and Local codes and the ceiling
fan must be properly grounded as a precaution against
possible electrical shock.
5.1
Connect the Green Ground Wire from the Hanger Ball and
the Green Ground Wire from the Hanger Bracket to the
Ground Conductor of Supply (this may be a bare wire or
wire with green colored insulation).
Securely connect Wires with the Wire Connectors
(supplied) (Figure 16).
WARNING
!
This product is designed to use only those parts supplied
with this product and/or any accessories designated
specifically for use with this product by Emerson Electric
Co. Substitution of parts or accessories not designated
for use with this product by Emerson Electric Co. could
result in personal injury or property damage.

5. How to Wire Your Ceiling Fan

GROUND
CONDUCTOR SUPPLY
LISTED WIRE
CONNECTOR
GREEN WIRE
(GROUND) FROM
HANGER BALL
GREEN WIRE
(GROUND) FROM
HANGER BRACKET
Figure 16
13
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF825