Emerson LINDELL CF825AP00 Mode D'emploi page 20

6.12
Remove the Finial Nut and Bowl Cap from the Light Kit
Fitter Assembly Threaded Screw (Figure 31).
Retain the Finial Nut and Bowl Cap for future use.
6.13
Feed the Light Kit Fitter Assembly Pull Chain through the
Center Hole of the Shade (Figure 32).
Feed the Switch Cup Housing Pull Chain through the Off
Center Hole of the Shade (Figure 32).
Position the Shade onto the Light Kit Fitter Assembly
Center Threaded Nipple (Figure 32).
CAUTION
Be sure that the Switch Cup Housing Pull Chain does
not make contact with the LED Light Bulbs. If
necessary reposition the Light Kit Fitter Assembly to
avoid the Switch Cup Housing Pull Chain from
touching the LED Light Bulbs.
6. Final Assembly
(Continued)
REMOVE &
RETAIN
Figure 31
SHADE
CENTER HOLE
LIGHT KIT FITTER
ASSEMBLY PULL CHAIN
Figure 32
20
LIGHT KIT FITTER
ASSEMBLY THREADED
SCREW
BOWL CAP
FINIAL NUT
SHADE
SHADE OFF
CENTER HOLE
SWITCH CUP
HOUSING PULL
CHAIN
U.L. Model No.: CF825