Emerson LINDELL CF825AP00 Mode D'emploi page 24

8. Switch Cup Housing Assembly Only
8.3
Align the Switch Cup Housing Holes with the Switch Cup
Plate Holes.
Carefully tuck all the Wires and Connectors into the Switch
Cup Housing.
Secure the Switch Cup Housing by reinstalling the Three
Switch Cup Plate Screws, previously removed
(Figure 39).
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the switch cup housing and the switch cup
plate.
A spare #8-32 x 8 mm Flat Head Screw is in the hardware
bag, if needed.
(Continued)
SWITCH CUP
HOUSING
Figure 39
24
(No Light Kit Usage)
SWITCH CUP PLATE
SCREWS (3)
U.L. Model No.: CF825