Explanation Of Displays And Buttons; Factory Settings - Becker Wind-Automatic WA10 Notice De Montage Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembly and Operating Instructions

Explanation of displays and buttons

LED
If the LED flashes slowly, the wind threshold has been exceeded.
If the LED flashes quickly, a line break has occurred at the wind sensor.
Wind threshold control switch
This control switch allows you to set the wind threshold values (approx. 2m/s to
22 m/s). The wind threshold value can be set to 11 different levels.
- Left limit stop = Level 1: retract when wind speed is low
+ Right limit stop = Level 11: retract when wind speed is high
Note
If the wind speed rises above the preset wind threshold, the sun protec­
tion system is retracted and remains closed. The sun protection sys­
tem is extended again if the wind speed remains below the preset wind
threshold for approx. 15 minutes.
Wind threshold value: Left limit stop (2 m/s)
12

Factory settings

Publicité

Table des Matières
loading

Table des Matières