Prise en main et utilisation
Riding your Trets
Stationner le Trets ou le Trets Trike à la verticale
Il est possible de stationner le Trets ou le Trets Trike à la
verticale, roue avant en l'air. Ce mode de stationnement
prend moins de place qu'avec un vélo ordinaire. Pour ce faire,
lever l'avant jusqu'à ce que le vélo repose sur l'arrière.
Usage du Trets en remorque à bagages
En rabattant le dossier du siège du Trets vers l'avant et en le
verrouillant dans cette position, vous pouvez utiliser la re-
morque pour des bagages. Veillez à un arrimage correct des
bagages sur la remorque ; veillez à ne pas dépasser le poids
maximal autorisé.
Transport du Trets
Si vous avez besoin de transporter le Trets en voiture, dans
le train ou dans tout autre véhicule, il vous est possible de le
raccourcir (cf. p. 7 Réglage de la longueur du cadre) et de ra-
battre le dossier vers l'avant.
. Sous le cadre, faites une marque (p. ex. au feutre indélé-
bile) pour repérer la position de la bôme par rapport au
cadre. Cela vous permettra de la remettre exactement en
position.
2. Repérez de même (p. ex. au feutre indélébile) l'inclinaison
exacte du timon. Vous retrouverez ainsi l'angle initial au
remontage. Desserrez les deux vis () de serrage du ti-
mon à l'aide d'une clé Allen de 6 mm et rabattez le timon
en arrière sur le siège.
3. Débloquez les deux goupilles d'arrêt (2) et rabattez le
dossier vers l'avant. Inclinez le dossier jusqu'au verrouilla-
ge en position transport.
Attention !
Protégez les composants fragiles, tels que p. ex. le dé-
railleur, qui pourraient être endommagés.
6
All manuals and user guides at all-guides.com
2
Parking the Trets or Trets Trike upright
The Trets or Trets Trike can be parked upright with the
front wheel (or drawbar) raised. In this position, it requires
less space than a standard bicycle. To park the Trets or Trets
Trike in this way, lift the front wheel (or drawbar) until it bal-
ances in the upright position.
Using the Trets as a luggage trailer
You can also convert the Trets to a luggage trailer by folding
the seat forward and locking it in this position. Be sure to fas-
ten the luggage securely to the trailer and do not exceed the
maximum permissible weight.
Transporting the Trets
The Trets can be adjusted to its most compact state for
transportation by car, train, or other vehicle (see also page 7,
"Adjusting the frame length"). The drawbar can be rotated to
the Frame and the seat folded forward.
. Mark (for example, with a permanent marker) the posi-
tion of the front boom in the main frame on the bottom
of the tube. This makes it easier to reassemble the trike
with its original dimensions.
2. Mark (for example, with a permanent marker) the
position of the drawbar (angle). This makes it easier to
readjust the drawbar to the original position. Loosen the
two clamp bolts () on the drawbar using a 6mm Allen
key, and fold the drawbar back and over the seat.
3. Release the two locking mechanisms (2) of the seat and
fold the seat forward. Lock the seat in the transport posi-
tion.
Caution!
Be sure to protect all sensitive parts, such as the rear
derailleur, from damage.
Trets 9/09-F-ENG