Auxiliary Functions Description - Albrecht DB 275 Dualband Mode D'emploi

4. Auxiliary Functions
4.1 VFO ΥVariable Frequency Oscillator, also known as "Frequency Mode)
 In VFO mode, press [UP] or [DOWN] to tune the desired frequency in the programmed
steps or directly type in the frequency needed by keypad.
4.2 Channel Storing
 There are 100 memory location to store frequencies with channel numbers from
01-100
 One special channel is reserved for the "Emergency Channel" with number 01.
To save a frequency as a channel, do following :
1. In VFO mode, choose the desired frequency and select CTCSS or DCS.
2. Press [MR] for 2 seconds , LCD shows channel number 01-100 (flashing).
3. Press [UP] or [DOWN] to select one channel number between 01-100.
4. Press [MENU] again to store the frequency..
5. You can now repeat the procedure for other frequencies you want to store as channels.
Note: User can store 100 channels (maximum), when a radio is in the single Frequency mode.
When using dual band function, user can store 50 channels (maximum) for each Frequency A and
Frequency B group.