Albrecht DB 275 Dualband Mode D'emploi page 82

scrambled!). If you press the MONI button, you can hear all communications by other parties on the
channel.
Channels with DCS / CTCSS RX coding do not need the normal squelch, it can remain open to
increase the receiver sensitivity and communication distance.
Squelch level setting
The Albrecht DB275 software can be used to program the squelch level from 0-9.
Battery Save
If the transceiver has active batteryΝsaveΝfunction,ΝtheΝδστΝwillΝshowΝ"S" as soon as the function
becomes active. The transceiver will enter the power save status as soon as no activity will be
detected for more than 10 seconds.
Keypad Tone On/Off

On: The clock symbol displays on the LCD when "Beep" sound is on, indicator sounds at
each key entry.

Off: no indicator sound is to be heard during any keyboard entry.
Transmit Power Selection
You can select transmit power for every channel separately, when you select high power, the LCD
willΝdisplayΝ"ώI",ΝwhenΝyouΝselectΝlowΝpower,ΝtheΝδστΝwillΝshowΝ"δη"ΝΥόactoryΝdefaultΝδηW)έ