How To Switch The Balance On Or Off - Mettler Toledo PE200 Mode D'emploi

OPERATION: How to switch the balance on or off
If you use your PE balance several times a day, it is best to leave it switched on all day long.
This way, a constant operating temperature can be reached and weighing accuracy is increased.
It is also recommended that the balance be switched on some time before you begin to work with it (warm-up time).
Switching the balance on
– Briefly press single control bar (15): all display
elements light up for a few seconds.
((((((
g
This will allow you to make a function check of the
display. Then the zero display lights up with as many
decimal places as are provided by te accuracy of
your balance model,
i.e. 0.00 g for the PE200, PE400
0.0 g for the PE2000, PE4000
6
Display indicates OFF
If the power supply is interrupted during operation,
the display will indicate "OFF" as soon as power is
restored.
At that time, you must briefly press single control bar
(15).
Switching the balance off
– Lift single control bar (15).