Peripheral Instruments (For 05 Data Output) - Mettler Toledo PE200 Mode D'emploi

PERIPHERAL INSTRUMENTS: Data output and data preparation
The three peripheral instruments introduced on this page can be connected to any PE200/400/2000/4000 balance equipped with a 05 Data Output (see preceeding
page).
Several peripheral instruments can be connected at the same time.
GA40 Thermal Printer
For the printed recording of weighing data.
Maintenance-free thermal printer (dot printer, no
printing ribbon), compact, fast and low noise.
Nonfading paper tape, not sensitive to mechanical
imprinting, rolls are 30 meter in lenght each and
will accommodate about 5000 lines of print. Width
of paper tape 57 mm (2 1 / inch).
4
Separate power supply:
110/130/220/240 V
Dimension (W x D x H):
185 x 200 x 60 mm
GC45 Remote Display
For the visual monitoring of weighing results away
from the weighing station.
Display is completely identical with that of the balance
itself.
Separate power supply:
110/130/220/240 V
Dimension (W x D x H):
185 x 200 x 60 mm
GC47 Digital/Analog Converter
For the conditioning of (digital) weighing data
generated by the balance for entry into analog
instruments such as line printers.
Two outputs: + 10 V; + 1 V
Multiswitch for decade selection (in group of three).
Separate power supply:
110/130/220/240 V
Dimension (W x D x H):
185 x 200 x 60 mm
13