Application Input Units; 05 Data Output - Mettler Toledo PE200 Mode D'emploi

ADDITIONAL FEATURES OF PE BALANCES: Application Input Units; 05 Data Output
Some very useful accessories for the PE200/400/2000/4000 are the GC302, GC303 and GC304 Application Input Units.
They make it possible to quickly and conveniently perform a variety of special weighing procedures and functions.
A data output (option 05) can be delivered along with every PE200/400/2000/4000 and easily installed by the user.
The necessary wires and connectors are already installed at the factory. In the next two pages we show you some of the METTLER TOLEDO peripheral instruments and
accessories which make it possible to use PE balances for special applications.
Connection for Application Input Units
Every PE200/400/2000/4000 is equipped with a
connection socket (3) for GC Application Input Units.
Application Input Units
These units are suitable for the following applications:
GC302 Application Input Unit
– Piece counting
– Percent weighing
– Net total weighing
– Animal weighing
12
GC303 Application Input Unit
– Piece counting with weight display in:
pounds/grams (lb/g)
ounces/grams (oz/g)
GC304 Application Input Unit
– Weighing in grams and in the following non-
metric units:
• Pounds (lb)
• Ounces (oz)
• Troy-ounces (ozt)
• Pennyweights (dwt)
• Grains (GN)
• Tael (tl)
• Carats (C.M.)
05 Data Output
The following peripheral instruments can be connect-
ed to the 05 Data Output (2):
– GA40 Thermal Printer
– GC45 Remote Display
– GC47 Digital/Analog Converter
(These instruments are discussed in greater detail
on the following page).
You can also retrofit your balance by using an
"Option 05 Field Installation Kit" (Order No. 47660).