Appendix; Notice For Verified Weighing Instruments In Ec Countries; Disposal - Mettler Toledo PBD555 Manuel Utilisateur

6
6.1
6.2
09/13 Order number 22023813A

Appendix

Notice for verified Weighing Instruments in EC Countries

Weighing instruments verified at the place of manufacture
bear the preceding mark on the packing label and a green
"M" sticker on the descriptive plate. They may be set to work
immediately.
Weighing instruments which are verified in two steps have
no green "M" on the descriptive plate and bear the preceding
identification mark on the packing label. The second step of
the verification must be carried
out by the approved METTLER TOLEDO service or by the W & M
authorities. Please contact your METTLER TOLEDO organiza-
tion. The first step of the verification has been carried out at
the manufacturing plant. It comprises all tests according to
EN45501-8.2.2.
If national regulations in individual countries limit the period
of validity of the certification, the operator of such a scale is
himself responsible for its timely re-certification.

Disposal

In conformance with the European Directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE), this device
must not be disposed of in domestic waste. This also applies
to countries outside the EU as per their specific regulations.
Please dispose of this product in accordance with local
➜
regulations at the collecting point specified for electrical
and electronic equipment.
If you have any questions, please contact the responsible
authority or the distributor from which you purchased this
device.
Should this device be passed on to other parties (for private
or professional use), the content of this regulation must also
be related. Thank you for your contribution to environmental
protection.
User Manual PBD555 and PBK785
METTLER TOLEDO
13