Danfoss ADAP-KOOL AKC 114 G Mode D'emploi page 21

AKC 114G
Drain valve
On/Off setting of drain valve in the suction line, terminals 16/17.
Service Mode
Main valve
On/Off setting of main valve in the suction line, terminals 18/19.
Service Mode
Alarm
ON/OFF setting of alarm output, terminals 20 and 21.
OFF will activate the alarm (cut-out output = active alarm).
Service Mode
Hot gas valves
On/Off setting of output for hotgas vavles, terminals 22 and 23.
Service Mode
When the forced control comes to an end, the service setting "Man. Ctrl." must be put in
position OFF before the service function is abandoned. The status of the outputs will now
return to the factory-set values.
If you leave the service function without putting "Man. Ctrl." in position OFF and changing the
function switch (Main Switch = 0 or 1), "Man.ctrl." will automatically move into position OFF. At
the same time the output settings will return to the factory-set values.
Function description RC.8A.R1.02 © Danfoss 10/2001
Manual control of Outputs
Manual control of Outputs
Manual control of Outputs
Manual control of Outputs
OFF/ON
Drain valve:
OFF/ON
Suction Val:
OFF/ON
Alarm:
OFF/ON
Hot Gas Val.:
21