Grundfos CM Serie Notice D'installation Et De Fonctionnement page 24

These Directives and standards apply until and including 19th April
2016:
– Machinery Directive (2006/42/EC).
Standard used:
EN 809:1998 + A1:2009.
– Low Voltage Directive (2006/95/EC).
Applicable when the rated power is lower than 2.2 kW.
Standards used:
EN 60335-1:2002
EN 60335-2-51:2003.
– EMC Directive (2004/108/EC).
– Ecodesign Directive (2009/125/EC).
Electric motors:
Commission Regulation No 640/2009.
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used EN 60034-30:2009.
– Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.
24
These Directives and standards apply from 20th April 2016 and
onwards:
– Machinery Directive (2006/42/EC).
Standard used:
EN 809:1998 + A1:2009
– Low Voltage Directive (2014/35/EU).
Standards used:
EN 60335-1:2002
EN 60335-2-51:2003
– EMC Directive (2014/30/EU).
– Ecodesign Directive (2009/125/EC).
Electric motors:
Commission Regulation No 640/2009.
Applies only to three-phase Grundfos motors marked IE2 or IE3.
See motor nameplate.
Standard used EN 60034-30:2009.
– Ecodesign Directive (2009/125/EC).
Water pumps:
Commission Regulation No 547/2012.
Applies only to water pumps marked with the minimum efficiency
index MEI. See pump nameplate.
This EC/EU declaration of conformity is only valid when published as
part of the Grundfos installation and operating instructions
(publication number 95121197 0116).
Székesfehérvár, 27 November 2015
Róbert Kis
Engineering Manager
GRUNDFOS Manufacturing Ltd.
Sóstó Ipari Park, Holland Fasor 15.
8000 Szekesfehervar, Hungary
Person authorised to compile the technical file and
empowered to sign the EC/EU declaration of conformity.