3 - USE OF THE APPLIANCE
The functioning modes if the air conditioner can be selected both through the remote control and through the
control panel located on board of the air conditioner.
The reception of the selected function is confirmed by the emission of a "beep" by the buzzer.
3.1 - CONTROL PANEL SYMBOLS AND KEYS
B
S3a
S4
S5
S7
S6
SW5
• SW1: Running / Stand-by;
• SW2: Working mode selection
cooling =˃
=˃ dehumidification =˃
=˃ fan only =˃
=˃ heating (active only in the version with
heat pump)=˃
=˃ cooling =˃ ...
• SW3: Temperature/delay set increase;
• SW4: Temperature/delay set decrease;
• SW5: Timer mode;
• SW6: Fan mode / WiFI mode;
• D1:
Set temperature/Timer
3.2 - REMOTE CONTROL KEYS
• B1: ON/OFF key;
• B2: "Timer" key;
• B3: "Sleep" key;
• B4: Temperature increase/delay key;
• B5: Temperature decrease/delay key;
• B6: "Fan";
• B7: "Mode" key
cooling =˃
=˃ dehumidification =˃
=˃ fan only =˃
=˃ heating (active only in the version with
heat pump)=˃
=˃ cooling =˃ ...
• B8: "Swing" key
S3b
S10
SW2
SW4
(Fig.C)
(Fig.B)
S0
D1
S8
SW3
SW6
• S0: "High" ventilation LED;
• S1: "Medium" ventilation LED;
• S2: "Low" ventilation LED;
• S3a: Cooling mode LED;
• S3b: Heating mode LED (only in version with heat
pump);
• S4: Dehumidification mode LED;
• S5: Fan mode LED;
• S6: Timer mode LED;
• S7: Sleep mode LED;
• S8: Swing LED;
• S9: Water tank full LED;
• S10: WiFI mode LED.
C
B6
B3
B5
B8
S1
S2
S9
SW1
B4
B7
B2
B1
EN - 19
DOLCECLIMA BREZZA