Getting Ready To Sew Connecting The Power Supply; Controlling Sewing Speed; Speed Control Slider; Foot Control - Janome S-7330 Manuel D'instructions

e
w
Operating Instructions:
The symbol "O" of a switch indicates the "off" position of a switch.
For U.S.A. and Canada only: To reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not modify the plug in any way.
q
r
y
t
GETTING READY TO SEW
Connecting the Power Supply
Turn off the power switch.
Insert the foot control plug into the machine socket.
Insert the machine plug into the machine socket.
Insert the power supply plug into the wall outlet.
Turn on the power switch.
Power Switch
q
Foot Control Plug
w
Machine Socket
e
Machine Plug
r
Power Supply Plug
t
Wall Outlet
y
For Your Safety:
While in operation, always keep your eyes on the
sewing area, and do not touch any moving parts such
as the thread take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the
power supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise
the machine will run intermittently.
When the power is turned on, the indicator window will
show a test pattern then will indicate 01.

Controlling Sewing Speed

Speed control slider

You can limit the maximum sewing speed with the
speed control slider according to your sewing needs.
To increase sewing speed, slide it to the right.
To decrease sewing speed, slide it to the left.

Foot control

Pressing on the foot control can vary sewing speed.
The harder you press the foot control, the faster the
machine runs.
NOTES:
The machine runs at the maximum speed set by the
speed control slider when the foot control is fully
depressed.
Keep the foot control free from accumulation of lint, dust
and loose cloth.
Do not place anything on the foot control.
Operating Instructions:
Foot controller Model YC-485EC-1 is for use with this
sewing machine.
8