Section Ii. Getting Ready To Sew Connecting Machine To Power Supply; To Use The Foot Control; To Use The Start/Stop Button; Before Using Your Sewing Machine - Janome 49018 Manuel D'instructions

SECTION II. GETTING READY TO SEW
Connecting Machine to Power Supply

• To use the foot control

Turn off the power switch q.
Insert the foot control plug w into the foot control jack e.
Insert the machine plug r into the power inlet t.
Insert the power supply plug y into the wall outlet u.
Turn on the power switch q.
The foot control sign i will be displayed when the
foot control is connected to the machine.
q Power switch
w Foot control plug
e Foot control jack
r Machine plug
t Power inlet
y Power supply plug
u Wall outlet
i Foot control sign

• To use the start/stop button

Turn off the power switch q.
Insert the machine plug w into the power inlet e.
Insert the power supply plug r into the wall outlet t.
Turn on the power switch q.
q Power switch
w Machine plug
e Power inlet
r Power supply plug
t Wall outlet
NOTE:
The start/stop button does not work when the foot
control is connected.

Before Using Your Sewing Machine

Before using your sewing machine for the first time, place a
scrap of fabric under the presser foot and run the machine
with thread for a few minutes. Wipe away any oil which may
appear.
* Do not place anything on the foot control when not sewing.
q
t
q
e
6
e
w
r
u
y
i
w
t
r