Changing Needles - Janome S-7330 Manuel D'instructions

z
q
r
WEIGHT
FABRIC
Very Light
Chiffon, Georgette, Fine Lace, Organdy
Net, Tulle
Light
Batiste, Voile, Lawn, Pure Silk, Crepe de Chine,
Sheer Crepe, Chambray, Handkerchief Linen,
Gingham, Challis, Percale, Wool Crepe, Peau de Soie,
Taffeta, Satin, Silk Surah, Satin-backed
Crepe, Qiana
Single Knits, Jersey, Swimwear, and Tricot
Leather Suede
Flannel, Velour, Velvet, Muslin, Velveteen,
Medium
Poplin, Corduroy, Broadcloth, Linen, Chintz,
Gabardine, Felt, Terry, Burlap, Quilted Fabrics
Double Knits, (synthetic and natural) Stretch
Velour, Stretch Terry, Sweater Knits
Leather, Vinyl, Suede
Denim, Sailcloth, Ticking
Heavy
Double Faced Wool, Heavy Coating, Fake Fur,
Drapery Fabrics
Leather, Suede
Very Heavy
Canvas, Duck, Upholstery Fabrics
Topstitching for Special Finishes

Changing Needles

Always make sure to turn the power switch off and
w
disconnect the machine from power supply before
changing the needle. Raise the needle by pressing
the up/down needle button and lower the presser foot.
Turn off the power switch.
1 Loosen the needle clamp screw by turning it
e
counterclockwise.
Remove the needle from the clamp.
q
2 Insert a new needle into the needle clamp with the
flat side of the needle to the rear.
When inserting the needle into the needle clamp,
push it up against the stopper pin and tighten the
needle clamp screw firmly.
w
e
To check needle straightness, place the flat side of
the needle onto something flat (a needle plate, glass
etc.) The gap between the needle and the flat surface
should be consistent.
Never use a blunt needle.
r
18
CAUTION:
Needle clamp screw
Stopper pin
Flat side
Gap
TYPE of NEEDLE
Universal
Ball Point
Blue Tipped Needle
Universal
Blue Tipped Needle
Ball Point
Wedge Point
Leather Needle
Universal
Ball Point
Wedge Point
Leather Needle
Denim Needle
Universal
Wedge Point
Leather Needle
Universal
Topstitching Needle
NEEDLE SIZE
9 (65)
9 (65)
11 (75)
11 (75)
12 (80)
11 (75)
11 (75)
11 (75)
14 (90)
14 (90)
14 (90)
16 (100)
16 (100)
16 (100)
18 (110)
16 (100)
14 (90)