Publicité
Les langues disponibles
Les langues disponibles
Connect a normal ½" garden hose (reinforced) of min. 5m. and max. 25m. to
the water supply and turn it on for a short time in order to flush any dirt out of
the hose. Now use a quick connector to connect the hose to the water inlet (see
fig. 7).
Attention!
The water temperature may not exceed 40°C.
The pressure of the water supplied
may not exceed 0.7 MPA (7 bar).
Only use
machine. Impurities or aggressive
chemicals damage the machine!
Turn the On/Off switch to the OFF / 0
position (see fig. 9).
Check that the specifications of the
socket that you wish to use correspond
with those on the type plate of the
machine. If this is the case, insert the
plug into the socket.
clean water
with this
37
Publicité
