Thermo Scientific Homogenizer S Mode D'emploi page 9

Chapter 6 | Maintenance
•
•
•
•
16 | Homogenizer
Reposition the padddles by clicking them and put
back the drip tray in the blending chamber.
Lift up the door and plug the power cord.
Position the switch at the back of the unit on "I".
Close the door. Check that the unit is operating.
EN
Thermo Scientific
6.2. Cleaning of door seals
Regularly lubricate the door seals with a lubricant containing silicone.
6.3. Annual maintenance
Lubricate the paddle rods with lubricating silicone grease.
Apply with a brush or a spray.
Thermo Scientific
Maintenance | Chapter 6
EN
Homogenizer | 17