Publicité
Les langues disponibles
Les langues disponibles
4. Operating Method
Timer
•
Connect the Homogenizer to the power mains (100-240 VAC). Put the
switch in position "I".
•
Set the blending time using the Time (
for open running.
•
Set the blending speed 1, 2, 3, 4 (4, 6, 8, 10 strokes/sec.) with the Speed (
or
) keys.
•
Pull the lever down to open the door. Place the bag with the sample in the
unit on the bag-rest.
•
Close the door by raising the lever until it clicks shut.
Thermo Scientific
4
Speed
Open running
On/Off
or
) keys or the
EN
Homogenizer
10
|
Thermo Scientific
Operating Method
•
The Homogenizer starts automatically
and the lighting under the front side
flashes orange slowly.
•
At the end of the cycle, the Homogenizer
stops automatically. The lighting turns
green, flashes quickly then more slowly.
At the end, the unit makes a beep.
•
Open the door and remove the bag.
The Homogenizer is ready for the next cycle.
EN
|
Chapter 4
Homogenizer
|
11
Publicité
Chapitres
