Special Settings; To Revert To The Factory Settings; Presence/Absence Of Beeps; Presence/Absence Of The Backlighting - Thermo Scientific Homogenizer S Mode D'emploi

5. Special Settings

You can decide to activate or deactivate some functions of the Homogenizer
such as: the beeps, the backlighting and the lighting in the blending
chamber.
All these operations must be carried out in "standby" mode.
At any time, you can revert the factory settings.

5.1. To revert to the factory settings

Press simultaneously the
On the display, after a series of hyphens, "rSEt" will appear.
This confirms the reinitialization of the factory settings.

5.2. Presence/absence of beeps

Press simultaneously the
After 4 seconds, 4 hyphens will appear: "----"
You can now release the keys.
Thermo Scientific
5
key and the "Speed " key.
key and the "Time " key
EN
Homogenizer
Then press continuously on the "Time
desired result, i.e. "SOn1" to active the sound or "SOn0" to deactivate it.
5.3. Presence/absence of the
backlighting
Press simultaneously the
After 4 seconds, 4 hyphens will appear: "----"
You can now release the keys.
Then press continuously on the
result, i.e. "dEl1" to activate the backlighting or "0dEl" to deactivate it.
12
| Thermo Scientific
Special Settings
) " key until you obtain the
key and the "Time " key
key until you reach the obtain
EN
| Chapter 5
Homogenizer | 13