Remote Control Instructions - KERN and SOHN PNJ Mode D'emploi

11.4 Remote control instructions

General order format:
Consisting of 4 characters including the terminators (CR, LF).
C1
Subsequent commands will be detected by the weighing scale.
1. Data output
C1 C2 Code (C1)
O 0 4FH
O 1 4FH
O 2 4FH
O 3 4FH
O 4 4FH
O 5 4FH
O 6 4FH
O 7 4FH
O 8 4FH
O 9 4FH
PNJ_PNS-BA-e-1612
C2 CR LF
Code (C2)
30H No data output
31H Continuous data output
Continuous data output stable
32H
weighing values
Output for stable and instable
33H weighing values after pressing
PRINT key
Output for stable weighing value
34H
after previous relief of balance
One output for stable weighing
value. No output for stable
35H
weighing values. Renewed
output after stabilization
One output for stable weighing
36H value. Continuous output for
instable weighing values.
Output of stable weighing values
37H
after pressing PRINT key
38H Single immediate output
39H Single output after stabilization
Function
A00: Free from error
E01: Error message
Response
73