Remote Control Instructions; Printer Mode - KERN and SOHN ALJ Mode D'emploi

11.6 Remote control instructions

Instruction:
"T" = H54
"C" = H43
"E" = H45
"M" = H4D
"O" = H4F

11.7 Printer mode

The following conditions must be met to provide successful communication between
the weighing balance and the printer.
• Use a suitable cable to connect the weighing balance to the interface of the
printer. Faultless operation requires an adequate KERN interface cable.
• The Baud rates of balance and printer must agree, see chap. 9.3.
Printout examples:
Weighing mode/peak value function
..........
Density determination
d= 2.80066 g/cm3d
d Measuring value „Density"
Parts counting
Pcs
Weight:
PMU:
PCS Number of pieces
Weight Weight of placed pieces
PMU Average parts weight
74
Function
Taring
Adjustment
Enter
Menu
ON/OFF
22.000 g
100
300.000 g
3.000 g
ALJ/ALS/PLJ/PLS-BA-e-1640