KERN and SOHN PNJ Mode D'emploi page 123

Sample protocol
(KERN YKB-01N)
+00033.33 % S
Display Description
1 % Minimum load £ reference weight < minimum load x 10
0.1 % Minimum load x 10 £ reference weight < minimum load x 100
0.01 % Minimum load x 100 £ reference weight
Reference weight < Minimum weight = underload
L-ERR
(minimum load depending on model, see chap. 1 „Technical data")
The reference weight (100 %) will remain stored even after the weighing
balance was turned off until the reference is reset.
PNJ_PNS-BA-e-1612
Place the reference weight (= 100 %) and confirm
by pressing the PRINT-key.
4. Percent determination
Place goods to be weighed on balance.
The weight of the sample is displayed in percentage in
terms of the reference weight.
5. Printing
The display value will be printed out by connecting an
optional printer and pressing the PRINT-key (factory
setting).
45