Show Software Status (Only Models Pnj) - KERN and SOHN PNJ Mode D'emploi

10.3 Show software status (only models PNJ)



PNJ_PNS-BA-e-1612
Press the F-key and the TARE-key at the same time
and keep them pressed until „Func2" will be displayed.
When released, „1.CrC. 0." is displayed.
Use the TARE-key to select the setting „1.CrC. 1."
Press F-key. Wait until the software status of the
balance is displayed.
Return to weighing mode:
Press the F-key repeatedly.
55