KERN and SOHN PNJ Mode D'emploi page 130

3.
4.
5.
52
For menu setting „23.Pi. 2" wait until the display
„H.SET" for setting the upper limit value appears.
The current setting flashes.
For numeric input of the nominal weight (e.g. 105
g) press the TARE-key for the upper limit value.
The last digit flashes.
Numeric input see step 2.
Save input with XX. The balance returns into the
tolerance weighing mode
From here evaluation takes place whether the
goods to be weighed are within the two tolerance
limits.
Start tolerance check
If necessary, place an empty container on the
balance and tare it.
Place goods to be weighed on balance. With the
help of the tolerance mark [ ] check if the weighed
goods are under, inside or over the default
tolerance.
Display example see chap. 9.3.2
Printing
The display value can be printed out by connecting
an optional printer and pressing the PRINT-key
(factory setting), sample protocols, see chap. 9.3.2
PNJ_PNS-BA-e-1612