KERN and SOHN PNJ Mode D'emploi page 128

4.
Sample displays:
5.
Sample protocols
(KERN YKB-01N)
+100.73 GGS
Load within specified
tolerance
+093.73 GLS
Load below specified
tolerance
+107.03 GHS
Load exceeds specified
tolerance
50
Start tolerance check
If necessary, place an empty container on the
balance and tare it.
Place goods to be weighed on balance. With
the help of the tolerance mark [ ] check if the
weighed goods are under, inside or over the
default tolerance.
Load below specified tolerance
Load within specified tolerance
Load exceeds specified tolerance
Printing
The display value will be printed out by
connecting an optional printer and pressing the
PRINT-key (factory setting).
G Weighing unit "gram"
G Load within specified tolerance
S Stable value
L Load below specified tolerance
H Load exceeds specified tolerance
PNJ_PNS-BA-e-1612