Multiple Tare - KERN and SOHN PNJ Mode D'emploi

7.6.2 Multiple tare

The taring process can be repeated any number of times, e.g. when adding several
components for a mixture (adding). The limit is reached when the taring range
capacity is full.


PNJ_PNS-BA-e-1612
Place first good to be weighed on balance. The result is
displayed.
Wait for stability display, then press the TARE button
The zero display and „Net" will appear.
Weigh-in the second weighing material. The weight of
the second weighing good is displayed.
For more weighing material repeat the two last steps.
35