Introduction; Technical Features; Particular Signs; General Information - Pentair STA-RITE CPS 10 Serie Instructions De Service

EN
CHAPTER 1

INTRODUCTION

1.1 PARTICULAR SIGNS

ATTENTION
The attention sign indicates the procedures requiring your absolute attention, otherwise you may cause damage to the
machine or equipment connected to it.
WARNING
The danger sign indicates the procedures requiring your absolute attention, otherwise you may get an electric shock.
NOTE
The note sign offers important information highlighted outside the text to which it refers.

1.2 GENERAL INFORMATION

With this manual PENTAIR INTERNATIONAL S.A.R.L.wants to provide the necessary information to install, use and maintain the CPS
inverter coupled with a Sta Rite motor pump.
ATTENTION
Incorrect use can dangerously damage the machine or the equipment, as well as result in guarantee forfeiture.
The CPS module has a single phase power supply and controls a three phase pump by reading the pressure of the electronic transducer
mounted on the collector outlet.
The module enables the operator to select the various system functions using a keyboard and LCD display mounted on same.
NOTE
This manual refers to standard type execution.

1.3 PRELIMINARY CHECKS

NOTE
This manual refers to standard type execution.
•
Check the packaging is intact
•
Open the packaging and remove the
machine
CHAPTER 2

TECHNICAL FEATURES

NOTE
For the motor pump refer to the information contained in the specific manuals.
ATTENTION
Do not use the product in environments with acid, corrosive and/or inflammable gas.
ATTENTION
Do not use the motor pump with dangerous liquids.
22
•
Check the machine corresponds to
that ordered
•
Check the machine is not damaged
•
If you receive an incorrect or
damaged machine, notify PENTAIR
INTERNATIONAL S.A.R.L.or the
authorised dealer within and not after
10 (ten) days from date of purchase