Building In - ETNA A126VWRVS Notice D'utilisation

INSTALLATION INSTRUCTIONS
Preparing the hob
Only for France
Cut opening in worktop
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualifi ed persons, in order to avoid dangerous situations.
Fit the elbow supplied on the appliance's gas connection.
1/2" ISO 228 (straight)
1/2" ISO 10226-1 (conical)
Sealing ring
1/2" ISO 228 (straight)
1/2" ISO 2280 (straight)
Sealing ring
• Saw the opening in the worktop. This should be done very
accurately (see building in dimensions).
• If the woodtop is made of treated wood, then coat the sawn
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
GB 13

Building in