ETNA A126VWRVS Notice D'utilisation page 60

INSTALLATION INSTRUCTIONS
Space to be left free around the appliance
Install appliance and make connections
A hob generates heat. Leave a suffi cient distance between the
appliance and non heat-resistant materials. Take care also with
materials that may discolour (such as stainless steel).
min. 650 mm
min. 450 mm
min. 100 mm
The gas hob may only be built in next to one vertical wall.
Please note
The bottom of the hob becomes hot. Do not place combustible items
in a drawer if the drawer is fi tted directly below the hob.
• Stick the sealing tape on the underside of the edge (see page 15).
Don't stick the sealing tape around the corner; rather cut four
pieces to fi t effectively in the corners.
• Place the appliance in the worktop and secure it using the
mounting brackets and screws supplied.
• Connect to the gas supply.
• Check with soap suds that the connection is gastight.
• Connect the appliance to mains electricity.
GB 16
Building in
min. 600 mm
min. 100 mm