Building In Dimensions - ETNA T007VB Serie Notice D'utilisation

Building in dimensions

Saw the opening in the worktop. This should be
done very accurately (see pictures 5,6,7,8).
Also saw out any partitions that may be
present. Ensure that there is sufficient
space allowed at the sides and at the back.
Ensure that there is a clear space with a
height of at least 15 mm below the
hob.
clearance required
-T009VR/VW P icture 5
P icture 7
Please note:
The distance between the hob and the rear
wall must be at least 40 mm.
P icture 4
P icture 6
P icture 8