Installation Instructions; Gas Connection; Electrical Connection; General - ETNA A126VWRVS Notice D'utilisation

INSTALLATION INSTRUCTIONS

Gas connection

Electrical connection

This appliance should only be connected up by a registered installer!
Please note
The type of gas and the country for which the appliance has been
designed are indicated on the application identifi cation card.
This is a category 3 appliance.
• The gas connection must comply with national and local
regulations.
• We recommend that the hob be connected by means of a fi xed
pipe. Connection using a specially designed safety hose is also
permitted.
• Behind an oven use must be made of a pipe made entirely out of
metal.
Please note
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• In all cases the connection tap for the appliance must be
positioned such that it is easily accessible.
• Before using the appliance for the fi rst time check the
connections using water and washing-up liquid to ensure
that there are no gas leaks.
230 V - 50 Hz - 0.6 VA
• The electrical connection must comply with national and local
regulations.
• Wall socket and plug must be accessible at all times.
• If you want to make a fi xed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in
the supply cable.
Please note
This appliance must be earthed.
GB 12

General