Building In Dimensions - ETNA T109V Notice D'utilisation

Building in dimensions

Saw the opening in the worktop. This should
be done very accurately (see ill.). Also saw out
any partitions that may be present. Ensure that
there is sufficient space allowed at the sides
and at the back. Ensure that there is a clear
space with a height of at least 15 mm below the
hob.
500
35
T109V - T109VW
500
560
A137VW - A139VW
585
560
min.40
480
740
33
min.40
480
Please note:
The distance between the hob and the rear
wall must be at least 40 mm.
clearance required
500
560
A130VW
500
830
A193VW
685
35
min.40
480
860
35
min.40
480