Fix The Sword - GRAUPNER racing Micro Magic HoTT Mode D'emploi

Fix the sword

Plug the sword from below into the sword bag (please pay attention to the direction) and screwed
up with the knurled nut.
Because of the weight the boat is now stable in the boat stand for the next steps.
Fit the mast in the opening in the main boom pivot.
Locate the loops in the shrouds and the backstay,
slip them through the small holes in the figure-of-
eight rigging eyes, then place all three under light
tension.
.
INNOVATION & TECHNOLOGIE
Check that the blocks on the sail setting lever are
attached to the inner holes; unscrew and re-fix
them if necessary. The blocks must be free to
move on the lever. If you have to make any chan-
ges, take care not to twist the two sheets.
35