The Mast; The Foresail - GRAUPNER racing Micro Magic HoTT Mode D'emploi

The Mast

The foresail

Attach the jib to the jib boom. Tie the cord at the tack permanently to the eye on the forward jib boom
swivel bracket, then screw the clew permanently to the clamp bracket.
Connect the two loops in the forestay to the small hole in the rigging eye at the mast swivel bracket.
Adjust the position of the shroud tensioner to the point where the foot and the foot of the two sails
are approximately in line. Now wrap the forestay round the weighted shaft, tie it, and secure the
cord with a drop of cyano. Locate the loop in the topping lift and connect it to the small hole at the
same time.
INNOVATION & TECHNOLOGIE
Now put the mast in its intended position
With a loop like the one of the jib clew the neck
is secured to the boom. The backstay is fixed loosely
with the hook to the eyelet on the rear.
37