Servo Mode; Setting Servo Flash Mode; Pre-Flash Suppression Or Synchronisation Settings - Metz mecablitz 64 AF-1 digital Mode D'emploi

10.4 SERVO mode

SERVO mode is a simple slave mode without
or with complete pre-flash suppression in
which the slave flash unit always triggers a
flash as soon as the camera flash unit recei-
ves a light pulse.
In SERVO mode, only manual flash mode is
possible. Manual flash mode is automatically
activated after switching to SERVO mode.

10.4.1 Setting SERVO flash mode

• Press the sensor button of the displayed
mode of operation on the touch display as
TTL
many times as it takes for the display for
selecting the mode of operation to appear.
0.8- 9.0 m
M-
m
35
Zoom
m
EV
• Press the
touch display and select
O
MODE
REMOTE SLAVE
SERVO
• Press the
touch display.
p
q
SYNC
M-Servo
The mode of operation is adopted.
M-
If desired, partial light output can be set,
Zoom 24 m
see 10.4.3.
m
P
1/1
sensor buttons on the
SERVO
.
SERVO
sensor button on the
10.4.2 Pre-flash suppression or
synchronisation settings
SYNC
• Press the sensor button
M-Servo
display as many times as it takes for the
display for selecting the type of synchroni-
M-
sation.
m
Zoom 24
m
P
1/1
• Press the sensor button on the touch
O
SYNC
display:
synchronisation without pre-flash
The synchronisation of operation is adop-
LEARN
ted.
If the synchronisation set here does not work
properly, then proceed as described in
10.4.4.
SYNC
on the touch
synchronisation with pre-flash
k
189