Switching Units - Soehnle Professional 7845 Mode D'emploi

10. Operation

10.5 Switching units

48
Tare Info
Press the zeroing key to display the tare info.
If you press briefly, the tare weight is deleted. If you press and hold down until
the weight display flashes, the tare weight is displayed and not deleted.
Delete tare
Press the zeroing key to delete the tare.
Intermediate tare function (dialysis function)
An intermediate tare function can be assigned to the function key (see separate
description User mode 7835, art. no. 470.702.124). Unknown tare values are
added to the existing tare value without changing the net display.
Press the function key to activate the intermediate tare function.
The display shows „hold".
Place additional tare weight on the platform or remove tare weight from the
platform.
The new tare value is accepted with the Send key.
Switching units
The weight or length unit (kg/lb or cm/ft) is switched by pressing the function
key.
(Setting of the function key: see separate description User mode 7835, art. no.
470.702.124)