Switching On/Off; Error Messages - Soehnle Professional 9330 Mode D'emploi

ENGLISH
GB
Compact Scales 9330

Switching On/Off

■
Switch the scales on and off using Power On/Off
button (see illustration). Do not load the scales at
this point. Warm­up time is about 15 minutes.
Important: Carefully place the items to be weighed on
the scales. Do not keep the platform continuously load­
ed. Avoid impacts or overloading beyond the specified
maximum load as this could damage the scales.
3. OPERATION
Taring
■
The scales can be tared several times
within the specified weighing range
(see Technical Data).
• Place a container on the platform.
• Press the Tare button.
• The display indicates zero.
• Place some other item on the scales.
After the scales come to rest, the net weight is dis­
played.
Deleting a tare value
With the scales unloaded, press
Important: Please load the scales only within the
specified weighing range. Despite overload protection,
overloading the scales can affect the weight measure­
ments and can cause damage to the scales.
8
■
NET:
GROSS:
STABLE:
ZERO:
kg:
■

4. ERROR MESSAGES

.
Symbols on the display panel
STABLE
ZERO
GROSS
NET
Charge battery
Net weight
Gross weight
Idle
No weight on scales/scales empty
Display in kilograms
Symbols on the keypad
Taring
Maximum weighing range
exceeded.
> Remove the items from the scales
The scales are not unloaded.
> Remove the weight and switch the
scales off and then on again
Remove the weight from the
scales and switch the scales off
and then on again.
> If this error message persists af­
ter switching on again, please con­
tact your service partner