Soehnle Professional 7845 Mode D'emploi page 44

8. Assembly
Step 3: Plug the display cable into the socket on the bottom of the scale
f
For battery operation see steps 4 & 5
For mains operation continue at step 6.
Step 4: (only with battery operation)
f
Open the battery compartment cover.
Step 5: (only with battery operation)
f
Insert the six AA batteries supplied.
Ensure correct polarity.
Then close the battery compartment cover
again.
Step 6: (only for mains operation)
f
Plug the optionally available power supply unit into the socket provided (see drawing above).
The scale is now ready to weigh.
f
44
Socket for power supply unit
Socket for display cable
3
4 5